CISCOKILLERS

CCNA, CCNP, WLAN ANSWERS AND MUCH MOREEEEE!!
 
HomeFAQSearchRegisterMemberlistUsergroupsLog in

Share | 
 

 module 7

Go down 
AuthorMessage
Admin
Admin


Number of posts : 72
Age : 31
Localisation : Cyprus
Registration date : 2007-02-22

PostSubject: module 7   Thu Nov 29, 2007 7:10 pm

CCNP 1
Chapter 7

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Which of the following are features of CLNP?

carries upper layer data and error indications over connectionless links
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Observe the diagram. The administrator requires the IS-IS adjacencies to authenticate so that no unauthorized routers will create adjacencies. Which command is required for an area to authenticate?

isis passwordpassword
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Which command enables IS-IS on a given interface?

ip router isis
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Which device in an IS-IS network is responsible for flooding link-state information on multi-access media?

the designated intermediate system
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Observe the above diagram. RTR-A performs a show clns neighbors and RTR-B does not appear in RTR-A's CLNS neighbor table. What is a possible reason?

The IS-IS circuit types are not the same.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Which two features make IS-IS more scalable than OSPF? (Choose two.)

more routers can reside in a single area
fewer link-state PDUs are used
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
In IS-IS routing, when is level 2 routing required?

when routing between level 1 areas in the same domain
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Given the above graphic, which configuration will ensure only a backbone connection adjacency between RTB and RTC?

RTC(config-if)# isis circuit-type level-2-only
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Which two commands must be issued to initially configure a network for IS-IS? (Choose two.)

net command
ip router isis
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
What is the area number for the following IS-IS router configuration?


RouterA(config)# router isis
RouterA(config-router)# net 49.2385.A02C.025B.0001.00
49.2385
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Given the above output, which statement is true?

Rtr-B is a L1/L2 router.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Which command is required in IS-IS to specify that a router will act only as a backbone router?

RTC(config-router)# is-type level-2-only
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Given the above output, which statement is true?

Fa0/0 is configured to establish a level-1 or level-2 adjacency.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
What is specified by Level 3 routing?

routing between separate domains
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Which of the following statements is true for IS-IS systems?
All ESs and Level 1 ISs must have a unique system ID area wide.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
In IS-IS routing, which level is used to route between end systems and intermediate systems within the same area?

level 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
In IS-IS routing, which of the following items describe the network service access point? (Choose two.)

the location at which OSI network services are provided to the transport layer
a conceptual point on the boundary between the network and transport layers
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
What is used to elect the designated intermediate system if all interface priorities are the same on a Frame Relay network?

highest local DLCI
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Observe the diagram. The IS-IS routers are not exchanging updates. What is a possible reason?

The routers are not in the same area.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Which of the following does IS-IS use to calculate the best path to a given destination?

the Dijkstra algorithm
_________________
Back to top Go down
View user profile http://www.ciscokillers.tk
robsam



Number of posts : 1
Registration date : 2010-06-03

PostSubject: Re: module 7   Thu Jun 03, 2010 9:08 am

Hello admin. you are god for Networking. Thanks a lot for nice information. cheers


_________________________
CCIE
Back to top Go down
View user profile
 
module 7
Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
CISCOKILLERS :: CCNP :: CCNP 1-
Jump to: