CISCOKILLERS

Skills Test

jc19 — Wed, 14 May 2008 14:42:41 GMT

does any1 have the cheat sheet for this? thanks

answer ccnp 1

Roni555 — Wed, 19 Mar 2008 22:50:54 GMT

Answer CCNAP 1

Questions

Admin — Thu, 29 Nov 2007 17:14:18 GMT

Feel free to ask about anything and answer to anything....

Thank u

Ciscokiller

question about CCNA 2 final

jreb271 — Thu, 24 Apr 2008 20:18:41 GMT

I'm looking for the answers to the ccna 2 version 4 final

CCNP 2 Chapter 2 and 4 answers

dlordnix — Mon, 21 Apr 2008 05:17:09 GMT

I'm posting this so no one else has the problem with chapter 2 and 4 answers.

Chapter 2:

1 Which Cisco line type is assigned the last TTY line number + 2?

CON

CTY

TTY

AUX

VTY X

2 Router A has 4 TTY lines and an AUX port. What line number will VTY 3 be?

0

4

5

9 X

10

3 Which line is used for incoming Telnet, local-area transport (LAT), X.25, and protocol-translation connections into synchronous router ports (Ethernet and serial interfaces)?

...

Network Security

El-Emin — Sat, 29 Mar 2008 16:56:00 GMT

Hi

does anyone have Network Security Q&A ?

CCNP 1 and 2 cisco answer version 3

soc — Tue, 25 Mar 2008 19:41:42 GMT

could you sent me cisco answer version 3 2008 || CCNP1 and 2?

e-mail: soc-clan@hotmail.com

FINAL

Admin — Tue, 13 Nov 2007 09:22:27 GMT

FINAL

- Version 1 -

====================================================

Refer to the exhibit. Which type of cabling should be used at each of the connection points shown?

*A-straight-through B-crossover C-straight-through D-fiber E-straight-through

====================================================

Which combination of network id and subnet mask correctly identifies all IP addresses from 172.16.128.0 through 172.16.159.255?

*172.16.128.0 255.255.224.0

====================================================

Which ...

ccnp 1 final exam questions and answers

vbreddi — Sun, 09 Mar 2008 18:31:01 GMT

Hi could you send me the questions of CCNP 1 version 3.1 final questions............... as soon as possible

cisco Fundamentals of Wireless LANs

wildman3 — Tue, 04 Mar 2008 01:57:59 GMT

can any body help me with finding the module answer for the WLANs. Realy under alot of pressure. the book that we are using is cisco Fundamentals of Wireless LANs. I need chapters 8,9,10,11 and the final. I thank all for the help.

ccnp 2 chapter 2 and 4

dlordnix — Sun, 17 Feb 2008 18:15:33 GMT

Anyone have the ccnp 2 chapter 2 and 4 test answers?? I have untill wednesday to take them. Any help would be greatly appreciated

CCNP 1 final questions pls..........

georggj — Tue, 12 Feb 2008 20:29:09 GMT

Hi can anyone send me the questions of CCNP 1 version 3.1 final questions...............

CCNP 2 chapter moduals

dlordnix — Sun, 03 Feb 2008 23:51:06 GMT

I was just wondering why a few of the CCNP 2 chapter tests were repeated like chapter 2 and 3; 4 and 5??

CCNA

marilynmcq — Wed, 09 Jan 2008 17:49:51 GMT

I am looking for Network Security. I will be starting the class soon and would be grateful for any help.

Practical

hh9 — Thu, 13 Dec 2007 17:48:11 GMT

Script good but I am not saying you will get 100% but it will get you a good pass

Set up 2 routers two switches and a cloud, three vlans on each switch, all ip addresses and cabling should be done by your instructor

YOUR TASK

Configuration tasks

Configuration Tasks

Configure OSPF

Use the following values to configure OSPF on the routers:

� Configure Merida with the OSPF router ID of 10.10.10.1.

� Configure Vargas with the OSPF router ID of 10.10.10.2.

� Configure ...

Where are the other questions for CCNA 4 Practice Final

argyris21 — Sat, 15 Dec 2007 09:14:02 GMT

dear administrator. CCNA 4 Practice Final has only 20 plus questions.! Request immediate response. Thank you. You should check the Final also for CCNA 4.

You've sad you've got it all. I pause in taking my practice final because i would take a near zerooo grade.

Practise final

Admin — Thu, 29 Nov 2007 17:01:25 GMT

CCNA 4

- Practice Final -

=========================

Use this at your own risk.

I'm not responsible for

what you do with it.

Happy cheating ^^

=========================

===========================================================================

A network administrator is asked to design a system to allow simultaneous access to the Internet for 250 users. The ISP for this network can only supply five public IPs. What can be used to accomplish this task?

routable ...

Skills review

hh9 — Thu, 13 Dec 2007 17:47:20 GMT

Which IP address ranges will match the usable hosts for the IP address and wildcard mask of 212.44.193.16/29 0.0.0.7?

212.44.193.16 - 212.44.193.23

212.44.193.17 - 212.44.193.22 XXX

212.44.193.0 - 212.44.193.63

212.44.193.0 - 212.44.193.255

212.44.193.64 - 212.44.193.127

Which wildcard mask will allow a match of any address in the 172.16.32.0/20 subnetwork?

0.0.240.255

0.0.15.255 XXX

0.0.31.255

0.0.0.255

0.0.63.255

Which IP addresses could be assigned ...

They will be here

Admin — Mon, 10 Dec 2007 13:59:32 GMT

hey mate

i will upload them in the following couple of days cuz i;m to busy to do it now

How to enable an expired assesment

Admin — Fri, 30 Nov 2007 15:50:22 GMT

#1

Download Tamper Data from http://tamperdata.mozdev.org/ and install it on firefox.

#2

Then go back to cisco, log in as usual and go to "Take Assesment".

#3

Before you click on the expired assesment you want to take, Go to Tamperdata (Under Tools -> Tamper Data) and press "Start Temper",

a window will appear and show something like "INCOMPLETE_EXAM = TRUE".

Now, remove the TRUE and set it to FALSE and press submit.

(An assesment ...

Subnetting made easy

Admin — Fri, 30 Nov 2007 15:47:48 GMT

Subnetting � The �Magic Number�

Drew Campbell � IT Manager / CCNA / CCAI

Community College of Beaver County Regional Academy

The easiest way to subnet an address is by using the �magic number� method. Here�s how it works:

In order to subnet, we need to know a couple things:

1. The network address we�ll be subnetting

2. How many subnets or hosts we need

Remember the rules of subnetting:

1. You must borrow at least 2 bits

2. You must leave at least 2 bits

We ...

Final exam

Admin — Fri, 30 Nov 2007 15:45:41 GMT

Final Exam

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Refer to the exhibit. According to the output from the show interface serial0/0 command, which dial backup method is configured on interface serial0/0?

o load backup X

o PPP callback for DDR

o Dialer Watch

o floating static routes

o Dialer Profiles

o Multilink PPP

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

A network administrator is defining ...

module 13

Admin — Fri, 30 Nov 2007 15:45:08 GMT

CCNP 2

Chapter 13

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which critical functions are provided by VPNs?(Choose three.)

confidentiality of information X

integrity of data X

authorization of users

authentication of users X

WAN management

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which IPSec element represents a policy contract between two peers or hosts?

AH

SA X

HMAC

ESP ...

module 12

Admin — Fri, 30 Nov 2007 15:44:38 GMT

CCNP 2

Chapter 12

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

In which data over ADSL architecture is the user PC required to run client software?

PPPoA

PPPoE X

CAP

RFC 1483/2684

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

A network administrator has partially set up the serial interfaces on the company router which connected to the ISP with an ADSL link. The ISP is running DHCP services to customers. ...

module 11

Admin — Fri, 30 Nov 2007 15:44:08 GMT

CCNP 2

Chapter 11

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

The network administrator in a large organization wants to delegate some router administration tasks to her technicians. Which AAA supported security protocol allows her to control which commands they can execute on a router?

LDAP

RADIUS

Kerberos

TACACS+ X

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which three security protocols can AAA ...

module 10

Admin — Fri, 30 Nov 2007 15:43:33 GMT

CCNP 2

Chapter 10

An application that uses a physical name will not reach a destination on the other side of a NAT router. How can this issue be resolved?

implement NAT overload

implement a separate NAT source address pool

implement a separate NAT destination pool

implement a static NAT translation X

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

What is the purpose of this group of router configuration commands?

RTA(config)# ip nat ...

module 9

Admin — Fri, 30 Nov 2007 15:42:52 GMT

CCNP 2

Chapter 9

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which queuing method is used inside each class in class-based weighted fair queuing (CBWFQ)?

FIFO X

PQ

CQ

WFQ

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

During periods of congestion, what process does a router use to schedule packets for transmission?

queuing X

buffering

switching

compression

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ...

module 8

Admin — Fri, 30 Nov 2007 15:42:30 GMT

CCNP 2

Chapter 8

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which set of commands will configure dialer watch on RTRA to watch for the Ethernet networks on RTR D?

RTRA(config-if)#dialer watch-list 1 ip 172.10.10.0

RTRA(config-if)#dialer watch-list 1 ip 172.10.20.0

RTRA(config)#dialer watch-group 2 ip 172.10.10.0 255.255.255.0

RTRA(config)#dialer watch-group 2 ip 172.10.20.0 255.255.255.0

RTRA(config-if)#dialer watch-group ...

module 7

Admin — Fri, 30 Nov 2007 15:42:00 GMT

CCNP 2

Chapter 7

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which flag is set by a Frame Relay switch to inform the receiving station that congestion was experienced?

BECN

DE

FECN X

FCS

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which term defines the clock speed of the connection to the Frame Relay cloud?

committed information rate

local access rate X

committed burst

excess information ...

module 6

Admin — Fri, 30 Nov 2007 15:41:27 GMT

CCNP 2

Chapter 6

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

A Cisco router is configured with the command encapsulation frame-relay on an interface. If both Cisco and non-Cisco equipment are installed at the destination, what is required to ensure communication with the non-Cisco equipment?

they must selectively configure encapsulation-type per DLCI X

they must use dynamic configuration

they must use Inverse ARP

they must use LMI type ...

module 5

Admin — Fri, 30 Nov 2007 15:40:38 GMT

CCNP 2

Chapter 5

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which statements are true regarding the use of dialer profiles when configured using ISDN BRI or PRI? (Choose three.)

Each B channel of an ISDN interface must be configured with the same IP subnet or IPX network address.

All B channels must use the same encapsulation.

Different DDR parameters can be set for each B channel of an ISDN interface. X

Different encapsulations can be ...

module 4

Admin — Fri, 30 Nov 2007 15:40:14 GMT

CCNP 2

Chapter 4

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which statements are true regarding the use of dialer profiles when configured using ISDN BRI or PRI? (Choose three.)

Each B channel of an ISDN interface must be configured with the same IP subnet or IPX network address.

All B channels must use the same encapsulation.

Different DDR parameters can be set for each B channel of an ISDN interface. X

Different encapsulations can ...

module 3

Admin — Fri, 30 Nov 2007 15:39:42 GMT

Chapter 3

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

What results if both PAP and CHAP are enabled on an interface?

Neither method can be used.

PAP and CHAP are used concurrently.

The first method specified is initially requested during link negotiation. X

The second method specified is initially requested during link negotiation.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which command creates ...

module 2

Admin — Fri, 30 Nov 2007 15:39:12 GMT

CCNP 2

Chapter 2

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

What results if both PAP and CHAP are enabled on an interface?

Neither method can be used.

PAP and CHAP are used concurrently.

The first method specified is initially requested during link negotiation. X

The second method specified is initially requested during link negotiation.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which command ...

module 1

Admin — Fri, 30 Nov 2007 15:38:43 GMT

CCNP 2

Chapter 1

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which router platform does not run the standard Cisco IOS?

700 series X

800 series

1000 series

1600 series

1700 series

2500 series

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which factor would be the least important when choosing a WAN service?

ease of management

quality of service

reliability

location of wiring ...

Still working

Admin — Thu, 29 Nov 2007 17:16:13 GMT

I will propably be rady with this category in a couple of days...

P.S. i have a couple of cheats for you to apply on cisco.netacad.net wchich u will love!!!!

Ciscokiller

module 9

Admin — Thu, 29 Nov 2007 17:11:48 GMT

CCNP1

Chapter 9

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

In which state does BGP start exchanging update packets with its peers?

connect

established *

update

active

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Based on the configuration below, which of the following statements are true?RTA(config)# router bgp 100RTA(config-router)# neighbor 190.10.50.1 remote-as 100RTA(config-router)# neighbor ...

module 8

Admin — Thu, 29 Nov 2007 17:11:11 GMT

CCNP 1

Chapter 8

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which show command would display a summary of all IP route filters on a router?

show ip protocols

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

On which IP interior gateway protocol would the passive interface appear as a stub network?

OSPF

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Based on the information ...

module 7

Admin — Thu, 29 Nov 2007 17:10:33 GMT

CCNP 1

Chapter 7

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which of the following are features of CLNP?

carries upper layer data and error indications over connectionless links

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Observe the diagram. The administrator requires the IS-IS adjacencies to authenticate so that no unauthorized routers will create adjacencies. Which command is required for an area to ...

module 6

Admin — Thu, 29 Nov 2007 17:09:51 GMT

Chapter 6

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

What are two reasons for creating an OSPF network with multiple areas? (Choose two.)

to reduce SPF calculations

to reduce memory and processor resources

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

What should be configured on the routers in Area 1 to eliminate all Type 3, 4, and 5 LSAs, leaving only the default route?

RTA(config-router)# area ...

module 5

Admin — Thu, 29 Nov 2007 17:09:21 GMT

CCNP1

Chapter 5

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which two statements describe the purpose of the EIGRP network command? (Choose two.)

Determines which networks are advertised within an EIGRP update across the network. *

Determines the type of network connection utilized across an interface.

Determines which networks belong to the EIGRP AS on the local router. *

Determines which EIGRP AS the local router is a member of.

Determines ...

module 4

Admin — Thu, 29 Nov 2007 17:08:39 GMT

CCNP 1

Chapter 4

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

What is the purpose of the route tag in a RIPv2 packet?

contains a 32-bit mask that identifies the network and subnet portion of the IP address

contains the IP address of the next hop listed in the IP Address field

indicates how many internetwork hops or routers have been traversed in the trip to the destination

differentiates between a request for a full routing table or a ...

Module3

Admin — Thu, 29 Nov 2007 17:07:59 GMT

CCNP1

Chapter 3

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which type of routing protocol maintains a full topological map of the network?

distance-vector protocol

link-state protocol *

interior gateway protocol

Internet packet exchange protocol

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Examine the output of the show running-config command.

interface serial 0

ip address 172.16.1.1 ...

Module2

Admin — Thu, 29 Nov 2007 17:07:24 GMT

CCNP1

Chapter 2

What is the optimal subnet mask on point-to-point serial links using VLSM?

255.255.255.0

255.255.255.224

255.255.255.252 *

255.255.255.255

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which command can be used on a Cisco router to allow a host to obtain an IP address from a DCHP server located on another subnet?

ip dhcp-server

ip name-server

ip dhcp-helper

ip helper-address *

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ...

Module1

Admin — Thu, 29 Nov 2007 17:06:56 GMT

CCNP1

Chapter 1

Which layer of the three-layer hierarchical design model is responsible for providing reliable, high-speed traffic forwarding?

core *

access

workgroup

distribution

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Which series of Cisco routers are recommended for use in the access layer?

2600, 2500, 1700, and 1600 *

12000, 7500, 7200, and 7000

3600, 4500, and 4000

12000, 3600, and 2600

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ...

Final

Admin — Thu, 29 Nov 2007 17:02:21 GMT

CCNA 4

- Final -

=========================

Use this at your own risk.

I'm not responsible for

what you do with it.

Happy cheating ^^

=========================

===========================================================================

Which of the following describes the roles of devices in a WAN? (Choose three.)

*** A CSU/DSU terminates a digital local loop.

A modem terminates a digital local loop.

A CSU/DSU terminates an analog local loop.

*** ...

CP Final

Admin — Thu, 29 Nov 2007 17:00:25 GMT

CCNA 4

- CP Final -

=========================

Use this at your own risk.

I'm not responsible for

what you do with it.

Happy cheating ^^

=========================

===========================================================================

Identify the factors that contribute to congestion on an Ethernet LAN. (Choose three.)

*** improper placement of enterprise level servers

*** addition of hosts to a physical segment

replacement of hubs with workgroup ...

Voucher

Admin — Thu, 29 Nov 2007 16:58:17 GMT

CCNA 4

Voucher

=========================

Use this at your own risk.

I'm not responsible for

what you do with it.

Happy cheating ^^

=========================

Exam is about 80% good.

===========================================================================

An administrator has made routing protocol changes to a router's configuration. To ensure that the changes are implemented, the active configuration is saved and the router is reloaded. After the router has ...

module6

Admin — Thu, 29 Nov 2007 16:56:36 GMT

CCNA 4

Chapter 6

=========================

Use this at your own risk.

I'm not responsible for

what you do with it.

Happy cheating ^^

=========================

===========================================================================

Why are SNMPv1 and SNMPv2c community strings considered a security risk?

SNMPv1 and SNMPv2c encapsulations are not encrypted by default.

SNMPv1 and SNMPv2c community strings are sent as cleartext. *

SNMPv1 and SNMPv2c ...

module5

Admin — Thu, 29 Nov 2007 16:55:49 GMT

CCNA 4

Chapter 5

=========================

Use this at your own risk.

I'm not responsible for

what you do with it.

Happy cheating ^^

=========================

===========================================================================

A ping is sent to address 192.168.50.10 from the Peanut router. Which DLCI will be used to send the ping?

110 *

115

220

225

===========================================================================

Which ...